...rogram, counted in 24-bit words. DSP56K_SET_TX_WSIZE sets the transmit word size. Allowed values are in the range 1 to 4, and is the number of bytes that will be sent at a time …...V-cards) decodes the IR signal internally and provides decoded button presses as scancode values. Drivers for this kind of hardware work in LIRC_MODE_SCANCODE mode. Such hardwar…...Data is sent to RxD in 5-byte packets. dx is sent as the sum of the two two's-complement values, dy is send as negated sum of the two two's-complement values. lb ( mb , rb ) are…...n of the following options is desired. Using MT_ST_BOOLEANS the options can be set to the values defined in the corresponding bits. With MT_ST_SETBOOLEANS the options can be sel…...ake up processes that do a select (2) or poll (2) for write access to /dev/random . These values can be changed by writing to the files. uuid and boot_id These read-only files c…...ake up processes that do a select (2) or poll (2) for write access to /dev/random . These values can be changed by writing to the files. uuid and boot_id These read-only files c…...sumed to be 100 years later, that is, between 2000 and 2069. Some RTCs support "wildcard" values in alarm fields, to support scenarios like periodic alarms at fifteen minutes af…...bb after the final P. Here n is the color (0–15), and rrggbb indicates the red/green/blue values (0–255). ECMA-48 CSI sequences CSI (or ESC [) is followed by a sequence of param…...oller lockup has been detected. See OPTIONS above for an explanation of the lockup_action values. /sys/class/scsi_host/host * /driver_version The driver_version attribute is rea…