zic(8)

NAME#

zic - timezone compiler

SYNOPSIS#

zic [ option ... ] [ filename ... ]

DESCRIPTION#

The zic program reads text from the file(s) named on the command line and creates the timezone information format (TZif) files specified in this input. If a filename is “-”, standard input is read.

OPTIONS#

--version

Output version information and exit.

--help

Output short usage message and exit.

-bbloat

Output backward-compatibility data as specified by bloat. If bloat is fat, generate additional data entries that work around potential bugs or incompatibilities in older software, such as software that mishandles the 64-bit generated data. If bloat is slim, keep the output files small; this can help check for the bugs and incompatibilities. The default is slim, as software that mishandles 64-bit data typically mishandles timestamps after the year 2038 anyway. Also see the -r option for another way to alter output size.

-ddirectory

Create time conversion information files in the named directory rather than in the standard directory named below.

-ltimezone

Link timezone localtime

If timezone is -, any already-existing link is removed.

-Lleapsecondfilename

Read leap second information from the file with the given name. If this option is not used, no leap second information appears in output files.

-ptimezone

Link timezone posixrules

If timezone is “-” (the default), any already-existing link is removed.

Unless timezone is “-”, this option is obsolete and poorly supported. Among other things it should not be used for timestamps after the year 2037, and it should not be combined with -b slim if timezone's transitions are at standard time or Universal Time (UT) instead of local time.

-r[@lo][/@hi]

Limit the applicability of output files to timestamps in the range from lo (inclusive) to hi (exclusive), where lo and hi are possibly signed decimal counts of seconds since the Epoch (1970-01-01 00:00:00 UTC). Omitted counts default to extreme values. The output files use UT offset 0 and abbreviation “-00” in place of the omitted timestamp data. For example, “zic -r @0” omits data intended for negative timestamps (i.e., before the Epoch), and “zic -r @0/@2147483648” outputs data intended only for nonnegative timestamps that fit into 31-bit signed integers. On platforms with GNU date, “zic -r @$(date +%s)” omits data intended for past timestamps. Although this option typically reduces the output file's size, the size can increase due to the need to represent the timestamp range boundaries, particularly if hi causes a TZif file to contain explicit entries for pre-hi transitions rather than concisely representing them with an extended POSIX.1-2017 TZ string. Also see the -b slim option for another way to shrink output size.

-R @hi

Generate redundant trailing explicit transitions for timestamps that occur less than hi seconds since the Epoch, even though the transitions could be more concisely represented via the extended POSIX.1-2017 TZ string. This option does not affect the represented timestamps. Although it accommodates nonstandard TZif readers that ignore the extended POSIX.1-2017 TZ string, it increases the size of the altered output files.

-tfile

When creating local time information, put the configuration link in the named file rather than in the standard location.

-v

Be more verbose, and complain about the following situations:

The input specifies a link to a link, something not supported by some older parsers, including zic itself through release 2022e.

A year that appears in a data file is outside the range of representable years.

A time of 24:00 or more appears in the input. Pre-1998 versions of zic prohibit 24:00, and pre-2007 versions prohibit times greater than 24:00.

A rule goes past the start or end of the month. Pre-2004 versions of zic prohibit this.

A time zone abbreviation uses a %z format. Pre-2015 versions of zic do not support this.

A timestamp contains fractional seconds. Pre-2018 versions of zic do not support this.

The input contains abbreviations that are mishandled by pre-2018 versions of zic due to a longstanding coding bug. These abbreviations include “L” for “Link”, “mi” for “min”, “Sa” for “Sat”, and “Su” for “Sun”.

The output file does not contain all the information about the long-term future of a timezone, because the future cannot be summarized as an extended POSIX.1-2017 TZ string. For example, as of 2023 this problem occurs for Morocco's daylight-saving rules, as these rules are based on predictions for when Ramadan will be observed, something that an extended POSIX.1-2017 TZ string cannot represent.

The output contains data that may not be handled properly by client code designed for older zic output formats. These compatibility issues affect only timestamps before 1970 or after the start of 2038.

The output contains a truncated leap second table, which can cause some older TZif readers to misbehave. This can occur if the -L option is used, and either an Expires line is present or the -r option is also used.

The output file contains more than 1200 transitions, which may be mishandled by some clients. The current reference client supports at most 2000 transitions; pre-2014 versions of the reference client support at most 1200 transitions.

A time zone abbreviation has fewer than 3 or more than 6 characters. POSIX requires at least 3, and requires implementations to support at least 6.

An output file name contains a byte that is not an ASCII letter, “-”, “/”, or “_”; or it contains a file name component that contains more than 14 bytes or that starts with “-”.

FILES#

Input files use the format described in this section; output files use tzfile(5) format.

Input files should be text files, that is, they should be a series of zero or more lines, each ending in a newline byte and containing at most 2048 bytes counting the newline, and without any NUL bytes. The input text's encoding is typically UTF-8 or ASCII; it should have a unibyte representation for the POSIX Portable Character Set (PPCS) ⟨https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap06.html⟩ and the encoding's non-unibyte characters should consist entirely of non-PPCS bytes. Non-PPCS characters typically occur only in comments: although output file names and time zone abbreviations can contain nearly any character, other software will work better if these are limited to the restricted syntax described under the -v option.

Input lines are made up of fields. Fields are separated from one another by one or more white space characters. The white space characters are space, form feed, carriage return, newline, tab, and vertical tab. Leading and trailing white space on input lines is ignored. An unquoted sharp character (#) in the input introduces a comment which extends to the end of the line the sharp character appears on. White space characters and sharp characters may be enclosed in double quotes (") if they're to be used as part of a field. Any line that is blank (after comment stripping) is ignored. Nonblank lines are expected to be of one of three types: rule lines, zone lines, and link lines.

Names must be in English and are case insensitive. They appear in several contexts, and include month and weekday names and keywords such as maximum, only, Rolling, and Zone. A name can be abbreviated by omitting all but an initial prefix; any abbreviation must be unambiguous in context.

A rule line has the form

Rule	NAME	FROM	TO	\n-\n	IN	ON	AT	SAVE	LETTER/S

For example:

Rule	US	1967	1973	\n-\n	Apr	lastSun	2:00w	1:00d	D

NAME

Gives the name of the rule set that contains this line. The name must start with a character that is neither an ASCII digit nor “-” nor “+”. To allow for future extensions, an unquoted name should not contain characters from the set “!$%&'()*,/:;<=>?@[\]^`{|}~”. “!$%&'()*,/:;<=>?@[\]^`{|}~”.

FROM

Gives the first year in which the rule applies. Any signed integer year can be supplied; the proleptic Gregorian calendar is assumed, with year 0 preceding year 1. Rules can describe times that are not representable as time values, with the unrepresentable times ignored; this allows rules to be portable among hosts with differing time value types.

TO

Gives the final year in which the rule applies. The word maximum (or an abbreviation) means the indefinite future, and the word only (or an abbreviation) may be used to repeat the value of the FROM field.

-

Is a reserved field and should always contain “-” for compatibility with older versions of zic. It was previously known as the TYPE field, which could contain values to allow a separate script to further restrict in which “types” of years the rule would apply.

IN

Names the month in which the rule takes effect. Month names may be abbreviated.

ON

bash

\n

5	the fifth of the month
lastSun	the last Sunday in the month
lastMon	the last Monday in the month
Sun>=8	first Sunday on or after the eighth
Sun<=25	last Sunday on or before the 25th

A weekday name (e.g., Sunday) or a weekday name preceded by “last” (e.g., lastSunday) may be abbreviated or spelled out in full. There must be no white space characters within the ON field. The “<=” and “>=” constructs can result in a day in the neighboring month; for example, the IN-ON combination “Oct Sun>=31” stands for the first Sunday on or after October 31, even if that Sunday occurs in November.

AT

bash

\n

2	time in hours
2:00	time in hours and minutes
01:28:14	time in hours, minutes, and seconds
00:19:32.13	time with fractional seconds
12:00	midday, 12 hours after 00:00
15:00	3 PM, 15 hours after 00:00
24:00	end of day, 24 hours after 00:00
260:00	260 hours after 00:00
\n-\n2:30	2.5 hours before 00:00
\n-\n	equivalent to 0

Although zic rounds times to the nearest integer second (breaking ties to the even integer), the fractions may be useful to other applications requiring greater precision. The source format does not specify any maximum precision. Any of these forms may be followed by the letter w if the given time is local or “wall clock” time, s if the given time is standard time without any adjustment for daylight saving, or u (or g or z) if the given time is universal time; in the absence of an indicator, local (wall clock) time is assumed. These forms ignore leap seconds; for example, if a leap second occurs at 00:59:60 local time, “1:00” stands for 3601 seconds after local midnight instead of the usual 3600 seconds. The intent is that a rule line describes the instants when a clock/calendar set to the type of time specified in the AT field would show the specified date and time of day.

SAVE

Gives the amount of time to be added to local standard time when the rule is in effect, and whether the resulting time is standard or daylight saving. This field has the same format as the AT field except with a different set of suffix letters: s for standard time and d for daylight saving time. The suffix letter is typically omitted, and defaults to s if the offset is zero and to d otherwise. Negative offsets are allowed; in Ireland, for example, daylight saving time is observed in winter and has a negative offset relative to Irish Standard Time. The offset is merely added to standard time; for example, zic does not distinguish a 10:30 standard time plus an 0:30 SAVE from a 10:00 standard time plus a 1:00 SAVE.

LETTER/S

Gives the “variable part” (for example, the “S” or “D” in “EST” or “EDT”) of time zone abbreviations to be used when this rule is in effect. If this field is “-”, the variable part is null.

A zone line has the form

Zone	NAME	STDOFF	RULES	FORMAT	[UNTIL]

For example:

Zone	Asia/Amman	2:00	Jordan	EE%sT	2017 Oct 27 01:00

NAME

The name of the timezone. This is the name used in creating the time conversion information file for the timezone. It should not contain a file name component “.” or “..”; a file name component is a maximal substring that does not contain “/”.

STDOFF

The amount of time to add to UT to get standard time, without any adjustment for daylight saving. This field has the same format as the AT and SAVE fields of rule lines, except without suffix letters; begin the field with a minus sign if time must be subtracted from UT.

RULES

The name of the rules that apply in the timezone or, alternatively, a field in the same format as a rule-line SAVE column, giving the amount of time to be added to local standard time and whether the resulting time is standard or daylight saving. If this field is - then standard time always applies. When an amount of time is given, only the sum of standard time and this amount matters.

FORMAT

The format for time zone abbreviations. The pair of characters %s is used to show where the “variable part” of the time zone abbreviation goes. Alternatively, a format can use the pair of characters %z to stand for the UT offset in the form ±hh, ±hhmm, or ±hhmmss, using the shortest form that does not lose information, where hh, mm, and ss are the hours, minutes, and seconds east (+) or west (-) of UT. Alternatively, a slash (/) separates standard and daylight abbreviations. To conform to POSIX, a time zone abbreviation should contain only alphanumeric ASCII characters, “+” and “-”. By convention, the time zone abbreviation “-00” is a placeholder that means local time is unspecified.

UNTIL

The time at which the UT offset or the rule(s) change for a location. It takes the form of one to four fields YEAR [MONTH [DAY [TIME]]]. If this is specified, the time zone information is generated from the given UT offset and rule change until the time specified, which is interpreted using the rules in effect just before the transition. The month, day, and time of day have the same format as the IN, ON, and AT fields of a rule; trailing fields can be omitted, and default to the earliest possible value for the missing fields.

The next line must be a “continuation” line; this has the same form as a zone line except that the string “Zone” and the name are omitted, as the continuation line will place information starting at the time specified as the “until” information in the previous line in the file used by the previous line. Continuation lines may contain “until” information, just as zone lines do, indicating that the next line is a further continuation.

If a zone changes at the same instant that a rule would otherwise take effect in the earlier zone or continuation line, the rule is ignored. A zone or continuation line L with a named rule set starts with standard time by default: that is, any of L's timestamps preceding L's earliest rule use the rule in effect after L's first transition into standard time. In a single zone it is an error if two rules take effect at the same instant, or if two zone changes take effect at the same instant.

If a continuation line subtracts N seconds from the UT offset after a transition that would be interpreted to be later if using the continuation line's UT offset and rules, the “until” time of the previous zone or continuation line is interpreted according to the continuation line's UT offset and rules, and any rule that would otherwise take effect in the next N seconds is instead assumed to take effect simultaneously. For example:

\n

# Rule	NAME	FROM	TO	\n-\n	IN	ON	AT	SAVE	LETTER/S
Rule	US	1967	2006	-	Oct	lastSun	2:00	0	S
Rule	US	1967	1973	-	Apr	lastSun	2:00	1:00	D
# Zone	NAME	STDOFF	RULES	FORMAT	[UNTIL]
Zone	America/Menominee	\n-\n5:00	\n-\n	EST	1973 Apr 29 2:00
	\n-\n6:00	US	C%sT

\n

A link line has the form

Link	TARGET	LINK-NAME

For example:

Link	Europe/Istanbul	Asia/Istanbul

\n
Link	Greenwich	G_M_T
Link	Etc/GMT	Greenwich
Zone	Etc/GMT  0  \n-\n  GMT

\n

Except for continuation lines, lines may appear in any order in the input. However, the behavior is unspecified if multiple zone or link lines define the same name.

The file that describes leap seconds can have leap lines and an expiration line. Leap lines have the following form:

Leap	YEAR	MONTH	DAY	HH:MM:SS	CORR	R/S

For example:

Leap	2016	Dec	31	23:59:60	+	S

Rolling leap seconds were implemented back when it was not clear whether common practice was rolling or stationary, with concerns that one would see Times Square ball drops where there'd be a “3... 2... 1... leap... Happy New Year” countdown, placing the leap second at midnight New York time rather than midnight UTC. However, this countdown style does not seem to have caught on, which means rolling leap seconds are not used in practice; also, they are not supported if the -r option is used.

The expiration line, if present, has the form:

Expires	YEAR	MONTH	DAY	HH:MM:SS

For example:

Expires	2020	Dec	28	00:00:00

EXTENDED EXAMPLE#

Here is an extended example of zic input, intended to illustrate many of its features.

\n

# Rule	NAME	FROM	TO	\n-\n	IN	ON	AT	SAVE	LETTER/S
Rule	Swiss	1941	1942	\n-\n	May	Mon>=1	1:00	1:00	S
Rule	Swiss	1941	1942	\n-\n	Oct	Mon>=1	2:00	0	\n-\n

Rule	EU	1977	1980	\n-\n	Apr	Sun>=1	1:00u	1:00	S
Rule	EU	1977	only	\n-\n	Sep	lastSun	1:00u	0	\n-\n
Rule	EU	1978	only	\n-\n	Oct	 1	1:00u	0	\n-\n
Rule	EU	1979	1995	\n-\n	Sep	lastSun	1:00u	0	\n-\n
Rule	EU	1981	max	\n-\n	Mar	lastSun	1:00u	1:00	S
Rule	EU	1996	max	\n-\n	Oct	lastSun	1:00u	0	\n-\n

# Zone	NAME	STDOFF	RULES	FORMAT	[UNTIL]
Zone	Europe/Zurich	0:34:08	\n-\n	LMT	1853 Jul 16
		0:29:45.50	\n-\n	BMT	1894 Jun
		1:00	Swiss	CE%sT	1981
		1:00	EU	CE%sT

Link	Europe/Zurich	Europe/Vaduz

\n

In this example, the EU rules are for the European Union and for its predecessor organization, the European Communities. The timezone is named Europe/Zurich and it has the alias Europe/Vaduz. This example says that Zurich was 34 minutes and 8 seconds east of UT until 1853-07-16 at 00:00, when the legal offset was changed to 7 degrees 26 minutes 22.50 seconds, which works out to 0:29:45.50; zic treats this by rounding it to 0:29:46. After 1894-06-01 at 00:00 the UT offset became one hour and Swiss daylight saving rules (defined with lines beginning with “Rule Swiss”) apply. From 1981 to the present, EU daylight saving rules have applied, and the UTC offset has remained at one hour.

In 1941 and 1942, daylight saving time applied from the first Monday in May at 01:00 to the first Monday in October at 02:00. The pre-1981 EU daylight-saving rules have no effect here, but are included for completeness. Since 1981, daylight saving has begun on the last Sunday in March at 01:00 UTC. Until 1995 it ended the last Sunday in September at 01:00 UTC, but this changed to the last Sunday in October starting in 1996.

For purposes of display, “LMT” and “BMT” were initially used, respectively. Since Swiss rules and later EU rules were applied, the time zone abbreviation has been CET for standard time and CEST for daylight saving time.

FILES#

/etc/localtime

Default local timezone file.

/usr/share/zoneinfo

Default timezone information directory.

NOTES#

For areas with more than two types of local time, you may need to use local standard time in the AT field of the earliest transition time's rule to ensure that the earliest transition time recorded in the compiled file is correct.

If, for a particular timezone, a clock advance caused by the start of daylight saving coincides with and is equal to a clock retreat caused by a change in UT offset, zic produces a single transition to daylight saving at the new UT offset without any change in local (wall clock) time. To get separate transitions use multiple zone continuation lines specifying transition instants using universal time.

SEE ALSO#

tzfile(5), zdump(8)