| • | If fd_in refers to a pipe, then off_in must be NULL. |
| • | If fd_in does not refer to a pipe and off_in is NULL, then bytes are read from fd_in starting from the file offset, and the file offset is adjusted appropriately. |
| • | If fd_in does not refer to a pipe and off_in is not NULL, then off_in must point to a buffer which specifies the starting offset from which bytes will be read from fd_in; in this case, the file offset of fd_in is not changed. |
| SPLICE_F_MOVE | Attempt to move pages instead of copying. This is only a hint to the kernel: pages may still be copied if the kernel cannot move the pages from the pipe, or if the pipe buffers don't refer to full pages. The initial implementation of this flag was buggy: therefore starting in Linux 2.6.21 it is a no-op (but is still permitted in a splice() call); in the future, a correct implementation may be restored. |
| SPLICE_F_NONBLOCK | Do not block on I/O. This makes the splice pipe operations nonblocking, but splice() may nevertheless block because the file descriptors that are spliced to/from may block (unless they have the O_NONBLOCK flag set). |
| SPLICE_F_MORE | More data will be coming in a subsequent splice. This is a helpful hint when the fd_out refers to a socket (see also the description of MSG_MORE in send(2), and the description of TCP_CORK in tcp(7)). |
| SPLICE_F_GIFT | Unused for splice(); see vmsplice(2). |
| EAGAIN | SPLICE_F_NONBLOCK was specified in flags or one of the file descriptors had been marked as nonblocking (O_NONBLOCK), and the operation would block. |
| EBADF | One or both file descriptors are not valid, or do not have proper read-write mode. |
| EINVAL | The target filesystem doesn't support splicing. |
| EINVAL | The target file is opened in append mode. |
| EINVAL | Neither of the file descriptors refers to a pipe. |
| EINVAL | An offset was given for nonseekable device (e.g., a pipe). |
| EINVAL | fd_in and fd_out refer to the same pipe. |
| ENOMEM | Out of memory. |
| ESPIPE | Either off_in or off_out was not NULL, but the corresponding file descriptor refers to a pipe. |
| splice() | moves data from the buffer to an arbitrary file descriptor, or vice versa, or from one buffer to another. |
| tee(2) | "copies" the data from one buffer to another. |
| vmsplice(2) | "copies" data from user space into the buffer. |
NAME
splice - splice data to/from a pipe
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#define _GNU_SOURCE\n /* See feature_test_macros(7) */
\n#define _FILE_OFFSET_BITS 64\n
\n#include <fcntl.h>ssize_t splice(int \nfd_in\n, off_t *_Nullable \noff_in\n,\n
\n int \nfd_out\n, off_t *_Nullable \noff_out\n,\n
\n size_t \nlen\n, unsigned int \nflags\n);DESCRIPTION
splice() moves data between two file descriptors without copying between kernel address space and user address space. It transfers up to len bytes of data from the file descriptor fd_in to the file descriptor fd_out, where one of the file descriptors must refer to a pipe.
The following semantics apply for fd_in and off_in:
- •
If fd_in refers to a pipe, then off_in must be NULL.
- •
If fd_in does not refer to a pipe and off_in is NULL, then bytes are read from fd_in starting from the file offset, and the file offset is adjusted appropriately.
- •
If fd_in does not refer to a pipe and off_in is not NULL, then off_in must point to a buffer which specifies the starting offset from which bytes will be read from fd_in; in this case, the file offset of fd_in is not changed.
Analogous statements apply for fd_out and off_out.
The flags argument is a bit mask that is composed by ORing together zero or more of the following values:
- SPLICE_F_MOVE
Attempt to move pages instead of copying. This is only a hint to the kernel: pages may still be copied if the kernel cannot move the pages from the pipe, or if the pipe buffers don't refer to full pages. The initial implementation of this flag was buggy: therefore starting in Linux 2.6.21 it is a no-op (but is still permitted in a splice() call); in the future, a correct implementation may be restored.
- SPLICE_F_NONBLOCK
Do not block on I/O. This makes the splice pipe operations nonblocking, but splice() may nevertheless block because the file descriptors that are spliced to/from may block (unless they have the O_NONBLOCK flag set).
- SPLICE_F_MORE
More data will be coming in a subsequent splice. This is a helpful hint when the fd_out refers to a socket (see also the description of MSG_MORE in send(2), and the description of TCP_CORK in tcp(7)).
- SPLICE_F_GIFT
Unused for splice(); see vmsplice(2).
RETURN VALUE
Upon successful completion, splice() returns the number of bytes spliced to or from the pipe.
A return value of 0 means end of input. If fd_in refers to a pipe, then this means that there was no data to transfer, and it would not make sense to block because there are no writers connected to the write end of the pipe.
On error, splice() returns -1 and errno is set to indicate the error.
ERRORS
- EAGAIN
SPLICE_F_NONBLOCK was specified in flags or one of the file descriptors had been marked as nonblocking (O_NONBLOCK), and the operation would block.
- EBADF
One or both file descriptors are not valid, or do not have proper read-write mode.
- EINVAL
The target filesystem doesn't support splicing.
- EINVAL
The target file is opened in append mode.
- EINVAL
Neither of the file descriptors refers to a pipe.
- EINVAL
An offset was given for nonseekable device (e.g., a pipe).
- EINVAL
fd_in and fd_out refer to the same pipe.
- ENOMEM
Out of memory.
- ESPIPE
Either off_in or off_out was not NULL, but the corresponding file descriptor refers to a pipe.
STANDARDS
Linux.
HISTORY
Linux 2.6.17, glibc 2.5.
In Linux 2.6.30 and earlier, exactly one of fd_in and fd_out was required to be a pipe. Since Linux 2.6.31, both arguments may refer to pipes.
NOTES
The three system calls splice(), vmsplice(2), and tee(2), provide user-space programs with full control over an arbitrary kernel buffer, implemented within the kernel using the same type of buffer that is used for a pipe. In overview, these system calls perform the following tasks:
- splice()
moves data from the buffer to an arbitrary file descriptor, or vice versa, or from one buffer to another.
- tee(2)
"copies" the data from one buffer to another.
- vmsplice(2)
"copies" data from user space into the buffer.
Though we talk of copying, actual copies are generally avoided. The kernel does this by implementing a pipe buffer as a set of reference-counted pointers to pages of kernel memory. The kernel creates "copies" of pages in a buffer by creating new pointers (for the output buffer) referring to the pages, and increasing the reference counts for the pages: only pointers are copied, not the pages of the buffer.
_FILE_OFFSET_BITS should be defined to be 64 in code that uses non-null off_in or off_out or that takes the address of splice, if the code is intended to be portable to traditional 32-bit x86 and ARM platforms where off_t's width defaults to 32 bits.
EXAMPLES
See tee(2).
SEE ALSO
copy_file_range(2), sendfile(2), tee(2), vmsplice(2), pipe(7)