pgrep(1)

—

Options · 37

--signalsignal	Defines the signal to send to each matched process. Either the numeric or the symbolic signal name can be used. In pgrep or pidwait mode only the long option can be used and has no effect unless used in conjunction with --require-handler to filter to processes with a userspace signal handler present for a particular signal.
-c--count	Suppress normal output; instead print a count of matching processes. When count does not match anything, e.g. returns zero, the command will return non-zero value. Note that for pkill and pidwait, the count is the number of matching processes, not the processes that were successfully signaled or waited for.
-d--delimiterdelimiter	Sets the string used to delimit each process ID in the output (by default a newline). (pgrep only.)
-e--echo	Display name and PID of the process being killed. (pkill only.)
-f--full	The pattern is normally only matched against the process name. When -f is set, the full command line is used.
-g--pgrouppgrp	Only match processes in the process group IDs listed. Process group 0 is translated into pgrep's, pkill's, or pidwait's own process group.
-G--groupgid	Only match processes whose real group ID is listed. Either the numerical or symbolical value may be used.
-i--ignore-case	Match processes case-insensitively.
-l--list-name	List the process name as well as the process ID. (pgrep only.)
-a--list-full	List the full command line as well as the process ID. (pgrep only.)
-n--newest	Select only the newest (most recently started) of the matching processes.
-o--oldest	Select only the oldest (least recently started) of the matching processes.
-O--oldersecs	Select processes older than secs.
-P--parentppid	Only match processes whose parent process ID is listed.
-s--sessionsid	Only match processes whose process session ID is listed. Session ID 0 is translated into pgrep's, pkill's, or pidwait's own session ID.
-t--terminalterm	Only match processes whose controlling terminal is listed. The terminal name should be specified without the "/dev/" prefix.
-u--euideuid	Only match processes whose effective user ID is listed. Either the numerical or symbolical value may be used.
-U--uiduid	Only match processes whose real user ID is listed. Either the numerical or symbolical value may be used.
-v--inverse	Negates the matching. This option is usually used in pgrep's or pidwait's context. In pkill's context the short option is disabled to avoid accidental usage of the option.
-w--lightweight	Shows all thread ids instead of pids in pgrep's or pidwait's context. In pkill's context this option is disabled.
-x--exact	Only match processes whose names (or command lines if -f is specified) exactly match the pattern.
-F--pidfilefile	Read PIDs from file. This option is more useful for pkill or pidwait than pgrep.
-L--logpidfile	Fail if pidfile (see -F) not locked.
-r--runstatesD	Match only processes which match the process state.
-A--ignore-ancestors	Ignore all ancestors of pgrep, pkill, or pidwait. For example, this can be useful when elevating with sudo or similar tools.
-H--require-handler	Only match processes with a userspace signal handler present for the signal to be sent.
--cgroupname	Match on provided control group (cgroup) v2 name. See cgroups(8)
--nspid	Match processes that belong to the same namespaces. Required to run as root to match processes from other users. See --nslist for how to limit which namespaces to match.
--nslistname	Match only the provided namespaces. Available namespaces: ipc, mnt, net, pid, user, uts.
-q--queuevalue	Use sigqueue(3) rather than kill(2) and the value argument is used to specify an integer to be sent with the signal. If the receiving process has installed a handler for this signal using the SA_SIGINFO flag to sigaction(2), then it can obtain this data via the si_value field of the siginfo_t structure.
-V--version	Display version information and exit.
-h--help	Display help and exit.
pattern	Specifies an Extended Regular Expression for matching against the process names or command lines.
0	One or more processes matched the criteria. For pkill and pidwait, one or more processes must also have been successfully signalled or waited for.
1	No processes matched or none of them could be signalled.
2	Syntax error in the command line.
3	Fatal error: out of memory etc.

NAME

pgrep, pkill, pidwait - look up, signal, or wait for processes based on name and other attributes

SYNOPSIS

pgrep [options] pattern pkill [options] pattern pidwait [options] pattern

DESCRIPTION

pgrep looks through the currently running processes and lists the process IDs which match the selection criteria to stdout. All the criteria have to match. For example,

: $ pgrep -u root sshd

will only list the processes called sshd AND owned by root. On the other hand,

: $ pgrep -u root,daemon

will list the processes owned by root OR daemon.

pkill will send the specified signal (by default SIGTERM) to each process instead of listing them on stdout.

pidwait will wait for each process instead of listing them on stdout.

OPTIONS

-signal
--signalsignal: Defines the signal to send to each matched process. Either the numeric or the symbolic signal name can be used. In pgrep or pidwait mode only the long option can be used and has no effect unless used in conjunction with --require-handler to filter to processes with a userspace signal handler present for a particular signal.
-c, --count: Suppress normal output; instead print a count of matching processes. When count does not match anything, e.g. returns zero, the command will return non-zero value. Note that for pkill and pidwait, the count is the number of matching processes, not the processes that were successfully signaled or waited for.
-d, --delimiterdelimiter: Sets the string used to delimit each process ID in the output (by default a newline). (pgrep only.)
-e, --echo: Display name and PID of the process being killed. (pkill only.)
-f, --full: The pattern is normally only matched against the process name. When -f is set, the full command line is used.
-g, --pgrouppgrp,...: Only match processes in the process group IDs listed. Process group 0 is translated into pgrep's, pkill's, or pidwait's own process group.
-G, --groupgid,...: Only match processes whose real group ID is listed. Either the numerical or symbolical value may be used.
-i, --ignore-case: Match processes case-insensitively.
-l, --list-name: List the process name as well as the process ID. (pgrep only.)
-a, --list-full: List the full command line as well as the process ID. (pgrep only.)
-n, --newest: Select only the newest (most recently started) of the matching processes.
-o, --oldest: Select only the oldest (least recently started) of the matching processes.
-O, --oldersecs: Select processes older than secs.
-P, --parentppid,...: Only match processes whose parent process ID is listed.
-s, --sessionsid,...: Only match processes whose process session ID is listed. Session ID 0 is translated into pgrep's, pkill's, or pidwait's own session ID.
-t, --terminalterm,...: Only match processes whose controlling terminal is listed. The terminal name should be specified without the "/dev/" prefix.
-u, --euideuid,...: Only match processes whose effective user ID is listed. Either the numerical or symbolical value may be used.
-U, --uiduid,...: Only match processes whose real user ID is listed. Either the numerical or symbolical value may be used.
-v, --inverse: Negates the matching. This option is usually used in pgrep's or pidwait's context. In pkill's context the short option is disabled to avoid accidental usage of the option.
-w, --lightweight: Shows all thread ids instead of pids in pgrep's or pidwait's context. In pkill's context this option is disabled.
-x, --exact: Only match processes whose names (or command lines if -f is specified) exactly match the pattern.
-F, --pidfilefile: Read PIDs from file. This option is more useful for pkill or pidwait than pgrep.
-L, --logpidfile: Fail if pidfile (see -F) not locked.
-r, --runstatesD,R,S,Z,...: Match only processes which match the process state.
-A, --ignore-ancestors: Ignore all ancestors of pgrep, pkill, or pidwait. For example, this can be useful when elevating with sudo or similar tools.
-H, --require-handler: Only match processes with a userspace signal handler present for the signal to be sent.
--cgroupname,...: Match on provided control group (cgroup) v2 name. See cgroups(8)
--nspid: Match processes that belong to the same namespaces. Required to run as root to match processes from other users. See --nslist for how to limit which namespaces to match.
--nslistname,...: Match only the provided namespaces. Available namespaces: ipc, mnt, net, pid, user, uts.
-q, --queuevalue: Use sigqueue(3) rather than kill(2) and the value argument is used to specify an integer to be sent with the signal. If the receiving process has installed a handler for this signal using the SA_SIGINFO flag to sigaction(2), then it can obtain this data via the si_value field of the siginfo_t structure.
-V, --version: Display version information and exit.
-h, --help: Display help and exit.

OPERANDS

pattern: Specifies an Extended Regular Expression for matching against the process names or command lines.

EXAMPLES

Example 1: Find the process ID of the named daemon:

: $ pgrep -u root named

Example 2: Make syslog reread its configuration file:

: $ pkill -HUP syslogd

Example 3: Give detailed information on all xterm processes:

: $ ps -fp $(pgrep -d, -x xterm)

Example 4: Make all chrome processes run nicer:

: $ renice +4 $(pgrep chrome)

EXIT STATUS

0: One or more processes matched the criteria. For pkill and pidwait, one or more processes must also have been successfully signalled or waited for.
1: No processes matched or none of them could be signalled.
2: Syntax error in the command line.
3: Fatal error: out of memory etc.

The process name used for matching is limited to the 15 characters present in the output of /proc/pid/stat. Use the -f option to match against the complete command line, /proc/pid/cmdline. Threads may not have the same process name as the parent process but will have the same command line.

The running pgrep, pkill, or pidwait process will never report itself as a match.

The -O --older option will silently fail if /proc is mounted with the subset=pid option.

BUGS

The options -n and -o and -v can not be combined. Let me know if you need to do this.

Defunct processes are reported.

pidwait requires the pidfd_open(2) system call which first appeared in Linux 5.3.

AUTHOR

Kjetil Torgrim Homme

REPORTING BUGS

Please send bug reports to [email protected]