localedef(1)

—

Options · 47

•	If outputpath contains a slash character ('/'), it is interpreted as the name of the directory where the output definitions are to be stored. In this case, there is a separate output file for each locale category (LC_TIME, LC_NUMERIC, and so on).
•	If the --no-archive option is used, outputpath is the name of a subdirectory in /usr/lib/locale where per-category compiled files are placed.
•	Otherwise, outputpath is the name of a locale and the compiled locale data is added to the archive file /usr/lib/locale/locale-archive. A locale archive is a memory-mapped file which contains all the system-provided locales; it is used by all localized programs when the environment variable LOCPATH is not set.
--add-to-archive	Add the compiledpath directories to the locale archive file. The directories should have been created by previous runs of localedef, using --no-archive.
--delete-from-archive	Delete the named locales from the locale archive file.
--list-archive	List the locales contained in the locale archive file.
-fcharmapfile--charmap	Specify the file that defines the character set that is used by the input file. If charmapfile contains a slash character ('/'), it is interpreted as the name of the character map. Otherwise, the file is sought in the current directory and the default directory for character maps. If the environment variable I18NPATH is set, $I18NPATH/charmaps/ and $I18NPATH/ are also searched after the current directory. The default directory for character maps is printed by localedef --help.
-iinputfile--inputfile	Specify the locale definition file to compile. The file is sought in the current directory and the default directory for locale definition files. If the environment variable I18NPATH is set, $I18NPATH/locales/ and $I18NPATH are also searched after the current directory. The default directory for locale definition files is printed by localedef --help.
-urepertoirefile--repertoire-map	Read mappings from symbolic names to Unicode code points from repertoirefile. If repertoirefile contains a slash character ('/'), it is interpreted as the pathname of the repertoire map. Otherwise, the file is sought in the current directory and the default directory for repertoire maps. If the environment variable I18NPATH is set, $I18NPATH/repertoiremaps/ and $I18NPATH are also searched after the current directory. The default directory for repertoire maps is printed by localedef --help.
-Aaliasfile--alias-file	Use aliasfile to look up aliases for locale names. There is no default aliases file.
-c	Write the output files even if warnings were generated about the input file.
-v	Generate extra warnings about errors that are normally ignored.
--big-endian	Generate big-endian output.
--little-endian	Generate little-endian output.
--no-archive	Do not use the locale archive file, instead create outputpath as a subdirectory in the same directory as the locale archive file, and create separate output files for locale categories in it. This is helpful to prevent system locale archive updates from overwriting custom locales created with localedef.
--no-hard-links	Do not create hard links between installed locales.
--no-warnings	Comma-separated list of warnings to disable. Supported warnings are ascii and intcurrsym.
--posix	Conform strictly to POSIX. Implies --verbose. This option currently has no other effect. POSIX conformance is assumed if the environment variable POSIXLY_CORRECT is set.
--prefix	Set the prefix to be prepended to the full archive pathname. By default, the prefix is empty. Setting the prefix to foo, the archive would be placed in foo/usr/lib/locale/locale-archive.
--quiet	Suppress all notifications and warnings, and report only fatal errors.
--replace	Replace a locale in the locale archive file. Without this option, if the locale is in the archive file already, an error occurs.
--warnings	Comma-separated list of warnings to enable. Supported warnings are ascii and intcurrsym.
-?	Print a usage summary and exit. Also prints the default paths used by localedef.
--usage	Print a short usage summary and exit.
-V	Print the version number, license, and disclaimer of warranty for localedef.
0	Command completed successfully.
1	Warnings or errors occurred, output files were written.
4	Errors encountered, no output created.
POSIXLY_CORRECT	The --posix flag is assumed if this environment variable is set.
I18NPATH	A colon-separated list of search directories for files.
/usr/share/i18n/charmaps	Usual default character map path.
/usr/share/i18n/locales	Usual default path for locale definition files.
/usr/share/i18n/repertoiremaps	Usual default repertoire map path.
/usr/lib/locale/locale-archive	Usual default locale archive location.
/usr/lib/locale	Usual default path for compiled individual locale data files.
outputpath/LC_ADDRESS	An output file that contains information about formatting of addresses and geography-related items.
outputpath/LC_COLLATE	An output file that contains information about the rules for comparing strings.
outputpath/LC_CTYPE	An output file that contains information about character classes.
outputpath/LC_IDENTIFICATION	An output file that contains metadata about the locale.
outputpath/LC_MEASUREMENT	An output file that contains information about locale measurements (metric versus US customary).
outputpath/LC_MESSAGES/SYS_LC_MESSAGES	An output file that contains information about the language messages should be printed in, and what an affirmative or negative answer looks like.
outputpath/LC_MONETARY	An output file that contains information about formatting of monetary values.
outputpath/LC_NAME	An output file that contains information about salutations for persons.
outputpath/LC_NUMERIC	An output file that contains information about formatting of nonmonetary numeric values.
outputpath/LC_PAPER	An output file that contains information about settings related to standard paper size.
outputpath/LC_TELEPHONE	An output file that contains information about formats to be used with telephone services.
outputpath/LC_TIME	An output file that contains information about formatting of data and time values.

NAME

localedef - compile locale definition files

SYNOPSIS

localedef	[ options ] outputpath

localedef	--add-to-archive [ options ] compiledpath

localedef	--delete-from-archive [ options ] localename ...

localedef	--list-archive [ options ]

localedef	--help

localedef	--usage

localedef	--version

The localedef program reads the indicated charmap and input files, compiles them to a binary form quickly usable by the locale functions in the C library (setlocale(3), localeconv(3), etc.), and places the output in outputpath.

The outputpath argument is interpreted as follows:

•: If outputpath contains a slash character ('/'), it is interpreted as the name of the directory where the output definitions are to be stored. In this case, there is a separate output file for each locale category (LC_TIME, LC_NUMERIC, and so on).
•: If the --no-archive option is used, outputpath is the name of a subdirectory in /usr/lib/locale where per-category compiled files are placed.
•: Otherwise, outputpath is the name of a locale and the compiled locale data is added to the archive file /usr/lib/locale/locale-archive. A locale archive is a memory-mapped file which contains all the system-provided locales; it is used by all localized programs when the environment variable LOCPATH is not set.

In any case, localedef aborts if the directory in which it tries to write locale files has not already been created.

If no charmapfile is given, the value ANSI_X3.4-1968 (for ASCII) is used by default. If no inputfile is given, or if it is given as a dash (-), localedef reads from standard input.

OPTIONS

Operation-selection options

A few options direct localedef to do something other than compile locale definitions. Only one of these options should be used at a time.

--add-to-archive: Add the compiledpath directories to the locale archive file. The directories should have been created by previous runs of localedef, using --no-archive.
--delete-from-archive: Delete the named locales from the locale archive file.
--list-archive: List the locales contained in the locale archive file.

Other options

Some of the following options are sensible only for certain operations; generally, it should be self-evident which ones. Notice that -f and -c are reversed from what you might expect; that is, -f is not the same as --force.

-fcharmapfile, --charmap=charmapfile: Specify the file that defines the character set that is used by the input file. If charmapfile contains a slash character ('/'), it is interpreted as the name of the character map. Otherwise, the file is sought in the current directory and the default directory for character maps. If the environment variable I18NPATH is set, $I18NPATH/charmaps/ and $I18NPATH/ are also searched after the current directory. The default directory for character maps is printed by localedef --help.
-iinputfile, --inputfile=inputfile: Specify the locale definition file to compile. The file is sought in the current directory and the default directory for locale definition files. If the environment variable I18NPATH is set, $I18NPATH/locales/ and $I18NPATH are also searched after the current directory. The default directory for locale definition files is printed by localedef --help.
-urepertoirefile, --repertoire-map=repertoirefile: Read mappings from symbolic names to Unicode code points from repertoirefile. If repertoirefile contains a slash character ('/'), it is interpreted as the pathname of the repertoire map. Otherwise, the file is sought in the current directory and the default directory for repertoire maps. If the environment variable I18NPATH is set, $I18NPATH/repertoiremaps/ and $I18NPATH are also searched after the current directory. The default directory for repertoire maps is printed by localedef --help.
-Aaliasfile, --alias-file=aliasfile: Use aliasfile to look up aliases for locale names. There is no default aliases file.
--force
-c: Write the output files even if warnings were generated about the input file.
--verbose
-v: Generate extra warnings about errors that are normally ignored.
--big-endian: Generate big-endian output.
--little-endian: Generate little-endian output.
--no-archive: Do not use the locale archive file, instead create outputpath as a subdirectory in the same directory as the locale archive file, and create separate output files for locale categories in it. This is helpful to prevent system locale archive updates from overwriting custom locales created with localedef.
--no-hard-links: Do not create hard links between installed locales.
--no-warnings=warnings: Comma-separated list of warnings to disable. Supported warnings are ascii and intcurrsym.
--posix: Conform strictly to POSIX. Implies --verbose. This option currently has no other effect. POSIX conformance is assumed if the environment variable POSIXLY_CORRECT is set.
--prefix=pathname: Set the prefix to be prepended to the full archive pathname. By default, the prefix is empty. Setting the prefix to foo, the archive would be placed in foo/usr/lib/locale/locale-archive.
--quiet: Suppress all notifications and warnings, and report only fatal errors.
--replace: Replace a locale in the locale archive file. Without this option, if the locale is in the archive file already, an error occurs.
--warnings=warnings: Comma-separated list of warnings to enable. Supported warnings are ascii and intcurrsym.
--help
-?: Print a usage summary and exit. Also prints the default paths used by localedef.
--usage: Print a short usage summary and exit.
--version
-V: Print the version number, license, and disclaimer of warranty for localedef.

EXIT STATUS

One of the following exit values can be returned by localedef:

0: Command completed successfully.
1: Warnings or errors occurred, output files were written.
4: Errors encountered, no output created.

ENVIRONMENT

POSIXLY_CORRECT: The --posix flag is assumed if this environment variable is set.
I18NPATH: A colon-separated list of search directories for files.

FILES

/usr/share/i18n/charmaps: Usual default character map path.
/usr/share/i18n/locales: Usual default path for locale definition files.
/usr/share/i18n/repertoiremaps: Usual default repertoire map path.
/usr/lib/locale/locale-archive: Usual default locale archive location.
/usr/lib/locale: Usual default path for compiled individual locale data files.
outputpath/LC_ADDRESS: An output file that contains information about formatting of addresses and geography-related items.
outputpath/LC_COLLATE: An output file that contains information about the rules for comparing strings.
outputpath/LC_CTYPE: An output file that contains information about character classes.
outputpath/LC_IDENTIFICATION: An output file that contains metadata about the locale.
outputpath/LC_MEASUREMENT: An output file that contains information about locale measurements (metric versus US customary).
outputpath/LC_MESSAGES/SYS_LC_MESSAGES: An output file that contains information about the language messages should be printed in, and what an affirmative or negative answer looks like.
outputpath/LC_MONETARY: An output file that contains information about formatting of monetary values.
outputpath/LC_NAME: An output file that contains information about salutations for persons.
outputpath/LC_NUMERIC: An output file that contains information about formatting of nonmonetary numeric values.
outputpath/LC_PAPER: An output file that contains information about settings related to standard paper size.
outputpath/LC_TELEPHONE: An output file that contains information about formats to be used with telephone services.
outputpath/LC_TIME: An output file that contains information about formatting of data and time values.

STANDARDS

POSIX.1-2008.

EXAMPLES

Compile the locale files for Finnish in the UTF-8 character set and add it to the default locale archive with the name fi_FI.UTF-8:

bash

localedef -f UTF-8 -i fi_FI fi_FI.UTF-8

The next example does the same thing, but generates files into the fi_FI.UTF-8 directory which can then be used by programs when the environment variable LOCPATH is set to the current directory (note that the last argument must contain a slash):