ip(8)

—

Options · 56

-V-Version	Print the version of the ip utility and exit.
-h-human-human-readable	output statistics with human readable values followed by suffix.
-b-batch	Read commands from provided file or standard input and invoke them. First failure will cause termination of ip.
-force	Don't terminate ip on errors in batch mode. If there were any errors during execution of the commands, the application return code will be non zero.
-s-stats-statistics	Output more information. If the option appears twice or more, the amount of information increases. As a rule, the information is statistics or some time values.
-d-details	Output more detailed information.
-l-loops	Specify maximum number of loops the 'ip address flush' logic will attempt before giving up. The default is 10. Zero (0) means loop until all addresses are removed.
-f-family	Specifies the protocol family to use. The protocol family identifier can be one of inet,inet6,bridge,mpls or link. If this option is not present, the protocol family is guessed from other arguments. If the rest of the command line does not give enough information to guess the family, ip falls back to the default one, usually inet or any. link is a special family identifier meaning that no networking protocol is involved.
-4	shortcut for -family inet.
-6	shortcut for -family inet6.
-B	shortcut for -family bridge.
-M	shortcut for -family mpls.
-0	shortcut for -family link.
-o-oneline	output each record on a single line, replacing line feeds with the '\' character. This is convenient when you want to count records with wc(1) or to grep(1) the output.
-r-resolve	use the system's name resolver to print DNS names instead of host addresses.
-n-netns	ip netns execNETNSip [ OPTIONS ] OBJECT { COMMAND \| help } to ip -n[etns] NETNS [ OPTIONS ] OBJECT { COMMAND \| help }
-N-Numeric	Print the number of protocol, scope, dsfield, etc directly instead of converting it to human readable name.
-a-all	executes specified command over all objects, it depends if command supports this option.
-c	Used color palette can be influenced by COLORFGBG environment variable (see ENVIRONMENT).
-t-timestamp	display current time when using monitor option.
-ts-tshort	Like -timestamp, but use shorter format.
-rc-rcvbuf	Set the netlink socket receive buffer size, defaults to 1MB.
-iec	print human readable rates in IEC units (e.g. 1Ki = 1024).
-br-brief	Print only basic information in a tabular format for better readability. This option is currently only supported by ip addr show,ip link show&ip neigh showcommands.
-j-json	Output results in JavaScript Object Notation (JSON).
-p-pretty	The default JSON format is compact and more efficient to parse but hard for most users to read. This flag adds indentation for readability.
-echo	Request the kernel to send the applied configuration back.
address	- protocol (IP or IPv6) address on a device.
addrlabel	- label configuration for protocol address selection.
fou	- Foo-over-UDP receive port configuration.
ila	- manage identifier locator addresses (ILA).
ioam	- manage IOAM namespaces and IOAM schemas.
l2tp	- tunnel ethernet over IP (L2TPv3).
link	- network device.
macsec	- MACsec device configuration.
maddress	- multicast address.
monitor	- watch for netlink messages.
mptcp	- manage MPTCP path manager.
mroute	- multicast routing cache entry.
mrule	- rule in multicast routing policy database.
neighbour	- manage ARP or NDISC cache entries.
netconf	- network configuration monitoring.
netns	- manage network namespaces.
nexthop	- manage nexthop objects.
ntable	- manage the neighbor cache's operation.
route	- routing table entry.
rule	- rule in routing policy database.
sr	- manage IPv6 segment routing.
stats	- manage and show interface statistics.
tcp_metrics/tcpmetrics	- manage TCP Metrics.
token	- manage tokenized interface identifiers.
tunnel	- tunnel over IP.
tuntap	- manage TUN/TAP devices.
vrf	- manage virtual routing and forwarding devices.
xfrm	- manage IPSec policies.
COLORFGBG	COLORFGBG environment variable usually contains either two or three values separated by semicolons; we want the last value in either case. If this value is 0-6 or 8, chose colors suitable for dark background: COLORFGBG=";0" ip -c a

NAME

ip - show / manipulate routing, network devices, interfaces and tunnels

SYNOPSIS

ip [ OPTIONS ] OBJECT { COMMAND | help }

ip [ -force ] -batchfilename

OBJECT := { address | addrlabel | fou | help | ila | ioam | l2tp | link | macsec | maddress | monitor | mptcp | mroute | mrule | neighbor | neighbour | netconf | netns | nexthop | ntable | ntbl | route | rule | sr | tap | tcpmetrics | token | tunnel | tuntap | vrf | xfrm }

OPTIONS := { -V[ersion] | -h[uman-readable] | -s[tatistics] | -d[etails] | -r[esolve] | -iec | -f[amily] { inet | inet6 | link } | -4 | -6 | -B | -0 | -l[oops] { maximum-addr-flush-attempts } | -o[neline] | -rc[vbuf] [size] | -t[imestamp] | -ts[hort] | -n[etns] name | -N[umeric] | -a[ll] | -c[olor] | -br[ief] | -j[son] | -p[retty] }

OPTIONS

-V,-Version

Print the version of the ip utility and exit.

-h,-human,-human-readable

output statistics with human readable values followed by suffix.

-b,-batch<FILENAME>

Read commands from provided file or standard input and invoke them. First failure will cause termination of ip.

-force

Don't terminate ip on errors in batch mode. If there were any errors during execution of the commands, the application return code will be non zero.

-s,-stats,-statistics

Output more information. If the option appears twice or more, the amount of information increases. As a rule, the information is statistics or some time values.

-d,-details

Output more detailed information.

-l,-loops<COUNT>

Specify maximum number of loops the 'ip address flush' logic will attempt before giving up. The default is 10. Zero (0) means loop until all addresses are removed.

-f,-family<FAMILY>

Specifies the protocol family to use. The protocol family identifier can be one of inet,inet6,bridge,mpls or link. If this option is not present, the protocol family is guessed from other arguments. If the rest of the command line does not give enough information to guess the family, ip falls back to the default one, usually inet or any. link is a special family identifier meaning that no networking protocol is involved.

-4

shortcut for -family inet.

-6

shortcut for -family inet6.

-B

shortcut for -family bridge.

-M

shortcut for -family mpls.

-0

shortcut for -family link.

-o,-oneline

output each record on a single line, replacing line feeds with the '\' character. This is convenient when you want to count records with wc(1) or to grep(1) the output.

-r,-resolve

use the system's name resolver to print DNS names instead of host addresses.

-n,-netns<NETNS>

ip netns execNETNSip [ OPTIONS ] OBJECT { COMMAND | help }

ip -n[etns] NETNS [ OPTIONS ] OBJECT { COMMAND | help }

-N,-Numeric

Print the number of protocol, scope, dsfield, etc directly instead of converting it to human readable name.

-a,-all

executes specified command over all objects, it depends if command supports this option.

-c[color][={always|auto|never}

Used color palette can be influenced by COLORFGBG environment variable (see ENVIRONMENT).

-t,-timestamp

display current time when using monitor option.

-ts,-tshort

Like -timestamp, but use shorter format.

-rc,-rcvbuf<SIZE>

Set the netlink socket receive buffer size, defaults to 1MB.

-iec

print human readable rates in IEC units (e.g. 1Ki = 1024).

-br,-brief

Print only basic information in a tabular format for better readability. This option is currently only supported by ip addr show,ip link show&ip neigh showcommands.

-j,-json

Output results in JavaScript Object Notation (JSON).

-p,-pretty

The default JSON format is compact and more efficient to parse but hard for most users to read. This flag adds indentation for readability.

-echo

Request the kernel to send the applied configuration back.

IP - COMMAND SYNTAX

OBJECT

address: - protocol (IP or IPv6) address on a device.
addrlabel: - label configuration for protocol address selection.
fou: - Foo-over-UDP receive port configuration.
ila: - manage identifier locator addresses (ILA).
ioam: - manage IOAM namespaces and IOAM schemas.
l2tp: - tunnel ethernet over IP (L2TPv3).
link: - network device.
macsec: - MACsec device configuration.
maddress: - multicast address.
monitor: - watch for netlink messages.
mptcp: - manage MPTCP path manager.
mroute: - multicast routing cache entry.
mrule: - rule in multicast routing policy database.
neighbour: - manage ARP or NDISC cache entries.
netconf: - network configuration monitoring.
netns: - manage network namespaces.
nexthop: - manage nexthop objects.
ntable: - manage the neighbor cache's operation.
route: - routing table entry.
rule: - rule in routing policy database.
sr: - manage IPv6 segment routing.
stats: - manage and show interface statistics.
tcp_metrics/tcpmetrics: - manage TCP Metrics.
token: - manage tokenized interface identifiers.
tunnel: - tunnel over IP.
tuntap: - manage TUN/TAP devices.
vrf: - manage virtual routing and forwarding devices.
xfrm: - manage IPSec policies.

The names of all objects may be written in full or abbreviated form, for example address can be abbreviated as addr or just a.

COMMAND

Specifies the action to perform on the object. The set of possible actions depends on the object type. As a rule, it is possible to add,delete and show (or list ) objects, but some objects do not allow all of these operations or have some additional commands. The help command is available for all objects. It prints out a list of available commands and argument syntax conventions.

If no command is given, some default command is assumed. Usually it is list or, if the objects of this class cannot be listed, help.

ENVIRONMENT

COLORFGBG

COLORFGBG environment variable usually contains either two or three values separated by semicolons; we want the last value in either case. If this value is 0-6 or 8, chose colors suitable for dark background:

COLORFGBG=";0" ip -c a

EXIT STATUS

Exit status is 0 if command was successful, and 1 if there is a syntax error. If an error was reported by the kernel exit status is 2.

EXAMPLES

ip addr

ip neigh

ip link set x up

ip link set x down

ip route

NAME

SYNOPSIS

OPTIONS

IP - COMMAND SYNTAX

OBJECT

COMMAND

ENVIRONMENT

EXIT STATUS

EXAMPLES

HISTORY

SEE ALSO

REPORTING BUGS

AUTHOR